Kerakoll Aquastop Flangia

Description

Kerakoll Aquastop Flangia Elastic NBR seal for pipes and drains, to be used prior to laying of ceramic, porcelain tiles and natural stone. Applied by cold bonding.

Practical and fast to apply with Aquastop Nanoflex and all Aquastop waterproofing products, Aquastop Flangia guarantees continuous waterproofing even around drain outlets and through elements.

Areas of application

Intended use:

Waterproof sealing of water/electrical systems, through elements and drains on external surfaces (balconies, terraces, flat roofs) and in damp environments (kitchens, shower cubicles, bathrooms, saunas). Do not use for exposed applications

Preparation of substrates

See the technical data sheets of the waterproofing products used for bonding.

Preparation

The seal is ready for use. Directly bond overlapping sections on-site using any Kerakoll waterproofing product from the Aquastop range.

For Aquastop Flangia 350×350 make an opening according to the diameter of the drainage outlet to be waterproofed prior to laying.

Application

Kerakoll Aquastop Flangia is applied on the floor (350×350) to create a waterproof joint with floor drains and on the wall (120×120) to create a waterproof joint for passage of water/electrical pipes.

To bond Aquastop Flangia apply the waterproofing product on the previously prepared substrate using a spreader, insert Aquastop Flangia into the drain or pipe to be waterproofed with the mesh side facing down, then press firmly onto the waterproofing layer while still wet.

When laying the second coat of the waterproofing product, completely cover Aquastop Flangia so that it is entirely embedded in the waterproofing layer