Kerakoll Proflow Rapid

Description

Kerakoll Proflow Rapid  Ultra-rapid setting double component smoothing compound. Fast track substrate preparation before laying resilient flooring.

The next generation formulation of Kerakoll Proflow Rapid is ideal for fast track installations where rooms or access need to be put back into service in a short time frame. With a walk on time of 30 minutes and an installation time of just 60 minutes, Proflow Rapid is a true ultra-rapid setting smoothing compound, with free flowing properties and moisture tolerant capabilities leaving a flawless surface finish.

1. Next generation moisture tolerant formulation
2. Flawless surface finish
3. Ultra-rapid setting allows foot traffic after just 30 minutes
4. Install resilient floor coverings after just 60 minutes
5. Moisture tolerant – can be used below DPM
6. Formulated with high-performance raw materials with low environmental impact
7. Suitable for installing any type of resilient floor covering
8. Apply by hand trowel, cam rake or pin level

Areas of application

Intended use
Self-smoothing adjustment of irregular and uneven substrates, with ultra-rapid setting and drying, compensated shrinkage. Thicknesses from 3 to 12 mm.
Compatible adhesives:
– single and double component organic adhesives for installing resilient floor coverings

Covering materials:
– LVT and design flooring
– vinyl, sheet vinyl and safety flooring
– mosaic tiles
– textiles, rubber, PVC, linoleum, carpet
– raised floors

Substrates:

– mineral screeds made with Keracem Eco as binder or pre-mixed product
– cement-based screeds
– calcium sulphate-based screeds
– prefabricated concrete or fresh concrete castings
– existing tiled floors
– flooring grade plywood
– flooring grade asphalt/bitumen
– epoxy DPM

Internal floors in domestic, commercial and
industrial applications.

Do not use in external applications or areas that
are continually submerged.

Formally Superflow 30