Resbuild Jointseal

£32.16£111.00 exl. VAT

Per Unit

Description

Coloured, Two Pack, Pourable Flexibilised Epoxy Sealant.

  • No primer required
  • Excellent adhesion to concrete
  • Tough and resilient
  • Very high resistance to water
  • Low viscosity
  • Good resistance to chemicals
  • Can accept traffic after 24 hours @ 20C

Please call office to check stock on all Resbuild products.

You May Also Need...

Description

Resbuild Jointseal – Epoxy sealant

Resbuild Jointseal – Epoxy sealant. The consistency of the mixed sealant allows direct pouring of the sealant into horizontal joints. Resbuild Jointseal is hard and tough enough to protect arris edges from heavy wheel loading, but possesses sufficient flexibility to accommodate a degree of movement (10% of the joint width). Resbuild Jointseal is particularly suitable for filling saw cut joints in long strip floor construction.

  • No Primer required
  • Excellent adhesion to concrete
  • Tough and resilient
  • Suitable for wide joints
  • Highly resistant to water
  • Easy to apply
  • Fast curing
  • Hygienic and easily cleanable
  • Low viscosity

Uses

To seal floor joints in food factories and warehouses where heavy vehicular trafficking occurs.

The mixed material may be poured directly into the prepared joints to level. Alternatively, Resbuild Jointseal may be poured into empty cartridge tubes and gunned into the joints using a sealant gun. It may be necessary to top up to level after a few minutes when the sealant has settled into irregularities.

 

Surface Preparation – New concrete floors shall be a minimum of 21 days old. Joint surfaces shall be sound, clean and free from laitance, dust and other contaminants. Joint arrises are best prepared by grinding or power wirebrushing; ensuring that all spoil and residual dust is removed by blowing with dry, oil free, compressed air. De-bonding tape should be used in the base of the joints otherwise a polyethylene foam backing strip should be inserted to the appropriate depth.

Mixing – Pour the contents of the CURING AGENT container into the BASE container and thoroughly mix, preferably by mechanical means until a uniform consistency is achieved.

Application – The mixed material may be poured directly into the prepared joints to level. Alternatively, Resbuild Jointseal may be poured into empty cartridge tubes and gunned into the joints using a sealant gun. It may be necessary to top up to level after a few minutes when the sealant has settled into irregularities.

 

Not quite what you’re looking for? Browse our full Resin Building Products Range here.

Learn more about Resin Building Products here.

Additional information

Size

1Ltr, 5Ltr, 2Ltr

Brand

Resin Building Products

Founded in 1995, Resin Building Products Limited offer a wide variety of resin based materials to meet the most exacting of requirements. They have developed a wide range of materials developed by their own in-house technical team, and have been involved in many prestigious schemes, some of them award winning. They strive to continue developing materials that are at the forefront of the resin industry.
Resbuild Clear Acrylic Resin Based Cureseal 25 Litre

Technical Information