Ronacrete Ronascreed Fast Dry Prompt 20L x 24 Full Pallet
£66.00 exl. VAT
Description
Free Next Day Delivery if ordered before 11am
- Lay flooring over 50mm screeds after 4 days
- Lay flooring over 75mm screeds after 6 days
- Lay flooring over 100mm screeds after 6 days
- Open to foot traffic next day
- Early commissioning of underfloor heating
- Liquid additive
- BRE screed test Category A
- Much more cost effective than cement replacement products
- No license required
You May Also Need...
Description
Ronacrete Ronascreed Fast Dry Prompt 20L x 24 Full Pallet
Ronacrete Ronascreed Fast Dry Prompt 20L x 24 Full Pallet is a fast drying additive for site batched screeds used to quickly reduce the level of retained moisture within the screed. This allows floor coverings to be laid over the screed much sooner than with conventional screeds. RonaScreed FastDry Prompt gains strength quickly, permitting early access by following trades. Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, whilst 75mm and 100mm screeds can accept the same coverings after only 6 days.
RonaScreed Fast Drying Additive for Site Batched Screeds screeds can be laid either bonded, unbonded or floating, determined by the substrate type. Bonded screeds must be laid on to a suitably prepared substrate (concrete slabs or existing screed). Unbonded screeds are those laid on a separating layer or preformed damp proof membrane. Floating screeds are those laid on to an insulation board or acoustic layer.
Drying
The drying speed of RonaScreed FastDry Prompt means commissioning of underfloor heating systems, or use of dehumidifiers, can commence after only 2 days at 75mm and 100mm thickness at 20°C and 60-65% air humidity.
The drying data is based on drying at 20°C and 65% relative humidity. Low temperature, high humidity, increased screed thickness and changing the mix design will delay drying. If the screed is covered with a curing membrane such as polythene, then the drying time starts when the membrane is removed. The relative humidity (RH) at the surface of the screed should be measured
with a hygrometer before proceeding to lay floor coverings. Standard practices should be followed.
Storage
Shelf life in unopened containers is 9 months. Store in a cool dry place. Protect from frost.
Not quite what you’re looking for?
Click here to browse more of our Ronacrete range.
Want to see how other Ronacrete products have been used? Click here to view a range of Ronacrete Projects.
Additional information
| Size | 5L, 20L, 210L |
|---|---|
| Suitable for Substrates | Minimum Thickness: 35mm Maximum Thickness: Compressive Strength @ 28 days: 40 N/mm2 Walkable: 24 Hours Finished Floor Laying After: 8 Days Suitable for Substrates: Concrete |
Brand
Ronacrete
