Ronadeck Resin Bound Surfacing Resin 7.5Kg

Description

RonaDeck ResinBound Surfacing is a permeable aggregate surface for pedestrian and vehicular traffic that has been formulated for the UK market. Ronadeck ResinBound Surfacing Resin is
a two component polyurethane resin which binds decorative kilndried aggregates. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to
drain to planted areas or land drains reducing the impact of urban development on flood risk and allowing water to flow into water courses when applied to a SuDS compliant base and sub-base

Application Thickness

When mixed with kiln dried aggregates no larger than 6mm in diameter, the minimum application thickness is 15mm for foot traffic and 18mm for driveways.

Aggregate Types

Only mix Ronadeck ResinBound Surfacing Resin with suitable washed and kiln dried aggregates

Application Conditions

Temperatures must be at least 5°C on a rising thermometer. Application during rain or when rain is anticipated during the cure period is not recommended.

Pack size 7.5kg

When ordering Ronadeck ResinBound Surfacing Resinin 7.5kg on its own, we suggest using the following coverage rates – 4m2 @ 15mm, 3.3m2 @ 18mm, 3m2 @ 20mm. These are typical coverage rates, however, they may vary depending on the aggregate used.