Tilemaster Adhesives Fast One Coat DPM

Description

Tilemaster Adhesives Fast One Coat DPM – Epoxy Based Damp Proof Membrane

Tilemaster Adhesives Fast One Coat DPM – Epoxy Based Damp Proof Membrane.

Fast One Coat DPM is a two component, solvent free, one coat epoxy Damp Proof Membrane.

Fast One Coat DPM is suitable for use on a wide range of substrates including concrete, sand/cement screeds, anhydrite and calcium sulphate screeds.

Fast One Coat DPM is ideal for use as a damp proof membrane where the residual moisture content in a new or existing screed is up to 98% relative humidity (RH).

Once cured, Fast One Coat DPM produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds and 87% RH on anhydrite / calcium sulphate screeds without resulting in bond strength issues.

Fast One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids.

Tilemaster Adhesives Fast One Coat DPM Uses

Apply one coat of mixed membrane with a straight-edged trowel or roller ensuring that the membrane is applied consistently, avoiding over application. Apply at temperatures above 10°C.

95 – 98% RH: 

Apply Tilemaster Fast One Coat DPM – Epoxy Based Damp Proof Membrane with a roller ensuring a uniform, pin-hole free finish. Apply to a maximum coverage rate of 22m2. The coverage rate will depend on the porosity of the substrate and the site conditions.

Below 95% RH: 

Apply Tilemaster FastOne Coat DPM – Epoxy Based Damp Proof Membranee with a roller ensuring a uniform, pin-hole free finish. Apply to a maximum coverage rate of 25m2

Up to 87% RH on Anhydrite / Calcium Sulphate Screeds: 

Apply Tilemaster FastOne Coat DPM – Epoxy Based Damp Proof Membrane with a roller ensuring a uniform, pin-hole free finish. Apply to a maximum coverage rate of 22m2

Not quite what you’re looking for? Click here to Browse more of our Tilemaster Adhesives range.

View more about Tilemaster Adhesives.